Choose your product category

Instructions:

PREPARATION:

  1. Gently push back your cuticles and cut or file your nails into wanted size.
  2. Clean your nail from any residues and grease with a nail polish remover and let it dry.
  3. Put on your Wild&Mild mindset and you’re ready for your manicure.

STEP 1.

Add your desired base coat.*

Apply one coat of Wild&Mild Long Lasting nail polish and let it dry.

* we recommend using base coat before applying any nail polish.

STEP 2.

Apply a second coat of Wild&Mild Long Lasting nail polish if necessary and let it dry.

Add your desired top coat.*

* we recommend using top coat for longer lasting results.

Instructions:

Before applying any product on your nail, make sure your nails are clean of any external residue, cuticles are nicely pushed back and nail plate is dry.

Base Shield

As a natural nail make-up: Apply one coat of Wild&Mild Base Shield on a clean and bare nail.

As a base coat: Apply one coat under your nail polish to protect your nails and increase the wearing time.

Ultimate Rescue

Step 1. Apply Wild&Mild Ultimate Rescue one or two coats on bare nails.

Step 2. It can be used any time your nails need a break from gel polish.

Vital Force

As a treatment: Apply Wild&Mild Vital Force two coats on bare nails twice a week.

As a base coat: Apply Wild&Mild Vital Force under your favourite nail polish.

Hard Rock Nails

Step 1. Apply on clean and bare nails two coats of Wild&Mild Hard Rock Nails as a shiny nail make-up.

Step 2. Re-apply once a week to promote strong, healthy nail growth after four weeks of regular use.

As a base coat: Apply on clean and bare nails one coat of Wild&Mild Hard Rock Nails as a base coat to protect your nails and increase the wearing time.

Nail Beauty Oil

Step 1. Apply a drop of oil on a clean, bare nail and cuticles.

Step 2. Massage the oil in to facilitate its absorption and stimulate nail growth.

Step 5. Position and press down firmly onto your nail close to the cuticle. Hold for few seconds until fixed.

Nail Growth Spa

Step 1. Apply Wild&Mild Nail Growth Spa on bare nails.

Step 2. Massage in to achieve better absorption.

Step 3. Re-apply as needed.

Instructions:

WHAT DO YOU NEED?

First of all, make sure you have everything you need to start the process:

  1. UV/LED lamp
  2. UV GEL base coat
  3. UV GEL color coat
  4. UV GEL top coat
  5. UV GEL remover
  6. Cotton pads

For removing gel:

  1. Cotton pads
  2. UV GEL remover
  3. Foil
  4. Pusher or orangewood stick

If you already have everything, then good luck!

If you don’t, then get some more.

I still need to get something before I can start

FIRST STEPS

Step 1. Clean your nails with Gel Polish Remover to remove any dust, grease, and moisture from nails.

Step 2. Apply a thin coat of Base Coat on your nails and cure under the LED lamp for 30 seconds.

Step 3. Do not touch and remove the sticky layer, it is normal. Make sure the gel product does not touch cuticles and skin.

SECOND STEPS

Step 1. Apply one coat of Color Gel on your nails and cure under the LED lamp for 30 seconds.

Step 2. Apply the second coat of colour gel and cure again for 30 seconds.

THIRD STEPS

Step 1. Apply a thin coat of Wild&Mild Gel Polish Top Coat on top of gel coloured nails and cure under led lamp for 30 seconds.

Step 2. Wipe off the sticky layer using a cotton pad soaked in Gel Polish Remover.

HOW TO REMOVE GEL?

Step 1. Soak a cotton pad in Wild&Mild Gel Polish Cleanser & Remover and place it on the nail.

Step 2. Wrap the nail into foil and allow the nail to soak for 15 minutes.

Step 3. Use pusher or orangewood stick to remove any Gel Polish residue

 

PRECAUTIONS!

Danger! Gel Polish Remover is highly flammable liquid and vapour. Store at temperatures below 25°C. Keep away from heat/sparks/open flames/hot surfaces/sunlight. No smoking. Keep out of reach of children.

Warning! Keep the products out of the reach of children. Irritating to eyes, respiratory system, and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Instructions:

PREPARATION:

  1. Gently push back your cuticles and cut or file your nails into wanted size.
  2. Clean your nail from any residues and grease with a nail polish remover and let it dry.
  3. Put on your Wild&Mild mindset and you’re ready for your HYBRID manicure.

FIRST STEPS

Step 1. Add a base coat and let it dry fully

Step 2. Add one layer of HYBRID Nail Polish and let it dry

Step 3. Add second layer of HYBRID Nail Polish and let it dry.

 

SECOND STEPS

Step 1. Add HYBRID Top Coat on HYBRID Nail Polish and let it dry under natural sunlight

Step 2. Enjoy your HYBRID System nail polish long-time wear 🙂

TIPS

  • You can use any base coat under HYBRID Nail Polish
  • Without using HYBRID Top Coat, your Hybrid Nail Polish will dry a lot longer
  • Remove with ordinary nail polish remover

Instructions:

Instructions:

PREPARATION:

Step 1. Remove nail polish. Clean and dry your natural nails, gently push back the cuticles with a manicure stick.

Step 2. Find the suitable sizes of artificial nails from the package to fit your nails.

NAIL APPLICATION

Step 1. Lightly file your natural nail surface to remove shine.

Step 2. Put a drop of glue underside of the artificial nail and spread it with a nozzle.

Step 3. Position and press down firmly onto your nail close to the cuticle. Hold for few seconds until fixed.

Step 4. Repeat with every nail.

REMOVING FALSE NAILS

Dissolve false nails by soaking it in acetone nail polish remover or false nail remover. Do not force! Any glue left on natural skin can be removed with a glue remover.

TIPS

  • False nails can be filed and painted with nail polish.
  • Use only acetone-free nail polish remover.
  • Nails can be worn about a week.
  • Wait a few hours or overnight before re-applying.

Instructions:

Step 1.

Using tweezers gently remove the eyelashes from the plastic tray

Step 2. 

Soften the band of the eyelash to curve it. Trim the width of lashes with scissors

Step 3.

Apply a few drops of eyelash adhesive to the false eyelash and wait for 5-6 seconds for the adhesive to begin to dry

Step 4.

Apply the eyelashes along the upper lash line, working from the outside corner to the eye towards the inner corner

Step 5.

Wait for the adhesive to dry completely before applying makeup

To remove

Hold eyelashes with your index finger and thumb and gently slide your fingers in opposite directions. 

Instructions:

Step 1.

Apply base coat or/and regular nail polish to your nails and let it dry.

Step 2.

Remove the plastic film protector from the image plate before first use.

Step 3.

Apply the nail polish over the desired design on a plate.

Step 4.

Hold the scraper at a 45-degree angle to scrape off excess nail polish.

Step 5.

Quickly press the stamper onto the plate to pick up the design.

Step 6.

Stamp the image onto your nail by either pressing down or by using a gentle rolling motion.

Instructions:

Choose an area with relatively little or no hair for best results.

1. step

Select and cut out design of your choice and remove clear plastic cover.

2. step

Press down firmly, design side down, making sure skin is clean and dry.

3. step

Using a cotton ball, apply water on back of design and fait for water to penetrate for 30 seconds.

4. step

Carefully slide off backing, rinse and let the fresh tattoo dry

To remove:

Apply few drops of baby oil or alcohol and rub gently. Make sure skin is clean and dry before applying another design.

Caution:

Do not apply on sensitive skin or near eyes. 

NB!

Designs are waterproof and will last longer when contact with lotions, creams or suntan oil is avoided.

If you have problems with any of our products, please make sure to get in contact and let us know. We will do our best to resolve this for you and others. Thank you!